MAIN MENU SETUP GUIDE
User Manual
22
Recording Status
: After clicking to put a checkmark in this function, a little square
icon will show on live preview interface when recording.
Step 5:
Click “default” button to restore default settings; click “apply” button to save
the settings; click “exit” button to exit current interface.
4.2.2 Main Monitor
Step 1:
Enter into system configuration
live configuration
Main monitor; refer to Fig
4-8:
Fig 4-8 Live Configuration-Main Monitor
Step 2:
Select split mode: 1×1, 2×2, 2×3, 3×3, 4×4 and channel
Step 3:
Dwell time: the time interval for a certain picture display before switching to
next picture display
Step 4:
Select the split mode, then setup current picture group. Click
button to
setup the previous channel groups of pictures, click
button to set latter channel
groups of pictures.
Step 5:
Click “default” button to restore default settings; click “apply” button to save
the settings; click “exit” button to exit current interface.
NOTE: If you have dual monitors Host monitor needs to be main monitor.
4.2.3 Spot
Step 1:
Enter into system configuration
live configuration
Spot; refer to Fig 4-9:
