BASIC FUNCTION
User Manual
14
3. BASIC FUNCTION
3.1 Power On/Off
Before you power on the unit, please make sure all the connections are good.
3.1.1 Power On
Step 1:
Connect the power supply; switch on the power button near the power port on
the rear panel
Step 2:
Press the power button on the front panel to start the LCD screen.
Step 3:
before start, a WIZZARD window will be pop-up and show some information
about time zone
，
time setup network configuration, record configuration and disk
management. User can setup here and refer to the concrete setup steps from the
corresponding chapters. If users don’t want to setup Wizard, please click Exit button to
exit.
After the device powers on, if there is no menu or only displays live image, user can
hold down ESC button to switch.
Notice: this unit can only display menu on VGA monitor or BNC
monitor one at a time. If there is live image display without menu
display, please check to see if other monitoring device has menu
display first, or hold down ESC key to wait for login dialog box to
appear.
3.1.2 Power Off
User can power off the device by using remote control, keyboard or mouse.
By Remote Control:
Step 1:
Press Power button, the Shut down window will appear, click OK, the unit will
power off after firmware is shut down.
Step 2:
Disconnect the power.
By Keyboard and Mouse:
