MAIN MENU SETUP GUIDE
User Manual
27
4.3.4 Stamp
Stamp
：
User can display the channel name and time stamp on video.
Step 1:
Enter into system configuration
record configuration
stamp; refer to Fig
4-14:
Fig 4-14 Record Configuration-Stamp
Step 2:
Checkmark camera name, time stamp; click Set button, user can use cursor
to drag the camera name and time stamp to random positions as shown below:
Before Drag After Drag
Step 3:
User can setup all channels with same parameters, checkmark “all”, then to
do relevant setup.
Step 4:
Click “default” button to restore default setting; click “apply” button to save the
setting; click “exit” button to exit current interface.
4.3.5 Recycle Record
Step 1:
Enter into system configuration
record configuration
recycle record;
