GETTING STARTED
User Manual
11
If the remote does not work check the following:
1. Check the pole position of the batteries
2. Check the remaining charge in the batteries
3. Check to make sure the sensor on the DVR is clear
4. If it still doesn't work, contact your supplier for a replacement
Figure 2-6 below illustrates the Remote Control functions as follows:
Fig 2-6 Remote Control
Number
Button
Description
1
Power
Soft switch off to stop firmware running. Use this
prior to turning off the DVR.
2
Info
Get information about the DVR like firmware
version, HDD information
3
REC
To record manually
4
Number buttons
Input numbers or choose camera
5
Multi screen button
To choose multi screen display mode
6
Search
To enter search mode
7
Menu
To enter menu
8
Enter
To confirm the choice or setup
9
Direction button
Move cursor in setup or move PTZ camera
10
+/-
To increase or decrease the value in setup
11
Playback
To control playback, Fast forward/ rewind/ stop/
single frame play
12
Audio
To enable audio output in live mode
