MAIN MENU SETUP GUIDE
User Manual
26
4.3.3 Time
Step 1:
Enter into system configuration
record configuration
time; refer to Fig
4-13:
Fig 4-13 Record Configuration-Time
Pre-alarm record time:
set
the record time before event happen i.e. record
time before motion detection or sensor alarm is triggered.
Post-alarm record:
set the post recording time after the alarm is finished, five
options: 10s, 15s, 20s, 30s and 60seconds.
Expire time:
the hold time of saved records. When the set date has passed,
the record files will be deleted automatically.
Step 2:
User can setup all channels with same parameters, checkmark “all”, then to
do relevant setup.
Step 3:
Click “default” button to restore default setting; click “apply” button to save the
setting; click “exit” button to exit current interface.
Parameter
Definition
Fps
Range from: 1-30
（
NTSC
）
1-25(PAL)
Resolution
Supports CIF, HD1 and D1
Quality
The quality of recorded images. The higher the value,
the clearer the recorded image is. Six options: lowest,
lower, low, medium, higher and highest.
