MAIN MENU SETUP GUIDE
User Manual
40
Send address/password:
sender’s email address/password
Receive address:
receiver’s email address. Here user can enter at least three
mail addresses.
Click TEST button to test the validity of the mailbox.
Attaching image amount:
user can attach up to three images at one time.
Snap Time Interval(s):
User can select snap time interval.
Fig 4-31 network configuration-email
4.6.4 Server
This function is mainly used for connecting ECMS. The user needs to enable the
active report first in the ECMS when adding a new device. Then enter into the server
interface and enable it. Input the IP address and port of the transfer media server of
ECMS. The default server port is 2009. If it is modified, please enter into the transfer
media interface to check. After the user enables the active report, the ECMS system
will auto allot a Device ID. The user needs to check this reported device ID in the
ECMS
Fig 4-32 network configuration-server
