MAIN MENU SETUP GUIDE
User Manual
25
Step 2:
Checkmark record, audio and record time
Step 3:
User can setup all channels with same parameters, checkmark “all”, then do
relevant setup.
Step 4:
Click “default” button to restore default setting; click “apply” button to save the
setting; click “exit” button to exit current interface.
4.3.2 Record stream
Step 1:
Enter into system configuration
record configuration
record bit rate; refer to
Fig 4-12:
Step 2:
Setup rate, resolution, quality, encode and max bit stream
Step 3:
User can setup all channels with same parameters, checkmark “All”, then to
do relevant setup.
Step 4:
Click “default” button to restore default setting; click “apply” button to save the
setting; click “exit” button to exit current interface.
Note: if you set a value that is higher than maximum supported by the device,
the value will be adjusted automatically.
Fig 4-12 Record Configuration-Record Bit Rate
