MAIN MENU SETUP GUIDE
User Manual
45
Fig 4-36 Add User-Authority
Step 2:
In the authority interface, assign the definite operation right for that user.
Step 3:
In the user management interface, click Setup button to modify user name,
user type and binding PC MAC address if used.
Step 4:
Select the user that you want to delete in the user list box, then click Delete
button to delete this user.
Step 5:
Click Change password button to modify the password; click Exit button to exit
the current interface.
4.8 P.T.Z configuration
P.T.Z configuration includes two submenus: serial port and advance
Serial Port
Step 1:
Enter into system configuration
P.T.Z configuration
serial port; refer to Fig
4-37:
Step 2:
Checkmark Enable, setup the value of address, baud rate and protocol
according to the settings of the PTZ speed dome.
Step 3:
User can setup all channels with same parameters, checkmark “all”, then to
do relevant setup.
Step 4:
Click “default” button to restore default setting; click “apply” button to save the
setting; click “exit” button to exit current interface.
