MAIN MENU SETUP GUIDE
User Manual
37
Step 2:
In this interface, set relay alarm out name, select hold time which means the
interval time between the two consecutive alarms.
Step 3:
User can setup all channels with same parameters, checkmark “all”, then to
do relevant setup.
Step 4:
Click “default” button to restore default setting; click “apply” button to save the
setting; click “exit” button to exit current interface.
②
Schedule
Step 1:
Enter into system configuration
schedule;
Step 2:
The setup steps of alarm out schedule are similar to schedule; user can refer
to 4.4.1 Schedule for details.
Note: the default schedule of motion detection is all of the time, that is, the color
of schedule interface is all blue.
③
Buzzer
Step 1:
Enter into system configuration
buzzer;
Step 2:
Checkmark Buzzer, set buzzer alarm hold time
4.6 Network Configuration
Network configuration includes five submenus: network and sub stream, Email, server
and other settings.
4.6.1 Network
Step 1:
Enter into system configuration
network configuration
network; refer to Fig
4-29:
HTTP port:
the default value is 80. If the value changed, user needs to add the port
number when typing IP address in IE address blank .i.e. set HTTP port to 82, IP
address:Server port
: communication port
