MAIN MENU SETUP GUIDE
User Manual
41
4.6.5 Other settings
Step1:
If you enable DDNS server: you need to input user name, password and
host domain name of the registered website, click TEST to test the effectiveness
of relevant information.
Fig 4-33 network configuration-other settings
Step 2
: click “default” button to restore default setting; click “apply” button to save
the setting; click “exit” button to exit current interface.
Note: The domain name server that is selected by the user is a banding
domain name of DVR. User should logon to the website provided by the
DDNS server supplier to register a user name and password, and then
apply for a domain name on line for the server. After successfully setting
up the account, the user can access the server through Internet Explorer
by inputting that domain name.
Enable UPnP:
User may select UPnP and then enable UPnP function in the user’s
router. Then user can access DVR through WAN. When accessing the DVR through
IE, user can check the IP address by the following method: Double-click the “My
Network Places” icon on the desktop in PC, select “Show icons for networked UPnP
devices” in the “Network Tasks” list box, a information window will pop up, click “YES”
button, “Windows Components Wizard” dialog box will pop up as shown as below
picture, press “Next” to continue. After finished the installation of configuring
components, the UPnP icons will display. Users can double-click certain icon and
check the IP address of the device.
