manualshive.com logo in svg

AUMA AC(V) 01.2, Руководство пользователя

AUMA AC(V) 01.2 - инновационный продукт для автоматизации процессов. Бесплатное руководство пользователя доступно для загрузки с нашего сайта. Получите детальные инструкции по установке и обслуживанию, чтобы максимально эффективно использовать данный продукт. {Website} - ваш источник полезной информации.

Поделиться
Скачать
background image

3.

Commissioning

3.1.

Introduction

When commissioning a Profibus DP network, the devices on the Profibus DP must
be parameterized and configured using the programming software at the controls
(Profibus configurator).

The programming software first reads the GSD file (GeneralStationData) of the
individual actuators. The GSD file contains information about the device properties
needed by the master.

Afterwards, the user can configure and parameterize the device at the Profibus DP
for the programming software of the process control system.

This information is then stored in the controls (DP master) and sent to the actuators
(DP slaves) each time cyclic communication is started.

The process representation input and output bytes are used to control the actuator
and to supply the feedback signals. If a configuration with consistent data is selected,
certain PLCs require special functional elements for the control of the Profibus DP
slaves.

Certification

AUMA actuators with Profibus DP are certified by the Profibus user organisation
(PNO).

ID number

Each DP slave and each DP master have individual ID numbers. The ID number is
required for the DP master to identify the type of device connected without signification
protocol overhead. The master compares the ID numbers of the connected DP
devices to the ID number in the specified configuration data. The process data transfer
will only be started if the correct device types with the correct station addresses were
connected to the bus. This ensures a high security against configuration errors.

The PNO manages the ID numbers together with the device master data (GSD).

AUMA actuators with actuator controls AC 01.2 are listed under the following ID
numbers at the PNO:

●

ID number of the standard version: 0x0C4F with functions for:
-

Single channel Profibus DP interface (not redundant)

-

Redundant Profibus DP interface according to AUMA redundancy (I or II)

-

Optional Profibus DP V1 services

●

ID number of the extended version: 0x0CBD with functions for:
-

Redundant Profibus DP interface according to Profibus DP-V2 redundancy

-

Time stamp and alarms according to Profibus DP-V2

-

Optional Profibus DP V1 services

Device Master Data

(GSD)

For Profibus DP, the performance features of the devices are documented by the
manufacturer and made available to the users as device data sheet and device
master data. Structure, contents and coding of the device master data (GSD) are
standardised. They enable comfortable configuration of any DP slaves with
configuration devices by different manufacturers.

For AUMA actuators with AC 01.2 controls, the following GSD files are available:

●

Standard version: AUMA0C4F.GSD with functions for:
-

Single channel Profibus DP interface (not redundant)

-

Redundant Profibus DP interface according to AUMA redundancy

-

Optional Profibus DP V1 services

●

Optional version: AUMA0CBD.GSD with functions for:
-

Redundant Profibus DP interface according to Profibus DP-V2 redundancy

-

Time stamp and alarms according to Profibus DP-V2

-

Optional Profibus DP V1 services

9

Actuator controls 
AC(V) 01.2/AC(V)ExC 01.2 Profibus DP 

Commissioning

Содержание AC(V) 01.2





























































































Отзывы:

Нет отзывов

Похожие инструкции для AC(V) 01.2

GE 400 Series Installation Instructions preview
400 Series
Бренд: GE Страницы: 2
XOXO Modular IXO Operation Manual And Installation Manual preview
IXO
Бренд: XOXO Modular Страницы: 13
Balboa Water Group BP Series User Interface And Programming Reference Manual preview
BP Series
Бренд: Balboa Water Group Страницы: 28
NEC ElectraElite IPK Installation And Maintenance Manual preview
ElectraElite IPK
Бренд: NEC Страницы: 20
Abicor Binzel EWR Quick Install Instructions preview
EWR
Бренд: Abicor Binzel Страницы: 8
Lawler 911 Installation & Maintenance Manual preview
911
Бренд: Lawler Страницы: 6
Data Aire dap4 touch Supplement Manual preview
dap4 touch
Бренд: Data Aire Страницы: 28
Gardena EasyPlus Operator'S Manual preview
EasyPlus
Бренд: Gardena Страницы: 14
Gardena 1273 Operating Instructions preview
1273
Бренд: Gardena Страницы: 4
Garmin G1000 NXi Cockpit Reference Manual preview
G1000 NXi
Бренд: Garmin Страницы: 220
Gardena 1251 Operator'S Manual preview
1251
Бренд: Gardena Страницы: 16
Garage Smart Hard Top Lifter User Manual preview
Hard Top Lifter
Бренд: Garage Smart Страницы: 20
IBM 3746-900 Installation Manual preview
3746-900
Бренд: IBM Страницы: 276
IBM 4769 Installation Manual preview
4769
Бренд: IBM Страницы: 32
IBM 3745 Series Connection And Integration Manual preview
3745 Series
Бренд: IBM Страницы: 157
Samson 3351 Mounting And Operating Instructions preview
3351
Бренд: Samson Страницы: 20
Vacon 100X series Installation, Technical And Maintenance Manual preview
100X series
Бренд: Vacon Страницы: 132
Parker EP Series Pro-Bloc Installation And Operation Manual preview
EP Series Pro-Bloc
Бренд: Parker Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды