AUMA AC(V) 01.2, Руководство пользователя

Страница: 69 / 92

Setting value Default Access Parameters Type No.
Min = 0 [s] 0 R/W Rate time Td U16 67-8
Max = 100 [s]
0: I/O interface 0 R/W Actual value source enum 67-12
1: Fieldbus interface
0: P controller 0 R/W Modulating behaviour enum 67-13
1: PI controller
2: PID controller
Internal 1 1 R/W Speed source PID enum PRM_5278
Internal 2
Internal 3
Internal 4
2 DigIn: "Internal (1-4)"
Analogue input
Fieldbus
Table 57: Failure behaviour
Setting value Default Access Parameters Type No.
Data length = 12 bytes
0: Good signal first 1 R/W Signal loss beh. enum 15-1
1: Immediately active
0:
STOP 0 R/W Failure operation enum 15-2
1: CLOSE
2: OPEN
3: Approach position
4:
Execute last CMD
1: Fieldbus interface 4 R/W Source enum 15-3
2: I/O interface
4: Active interface
Min = 0 [0.1 s] 30 R/W Delay time Mmss01 15-4
Max = 1800 [0.1 s]
Min = 0 [0.1 %] 500 R/W Fail.pos.OPEN CLOSE U16 15-5
Max = 1000 [0.1 %]
Min = 0 [0.1 %] 500 R/W Failure position MPV U16 15-6
Max = 1000 [0.1 %]
Min = 6 [rpm] 45 R/W Failure speed OPEN U16 PRM_5126
Max = 240 [rpm.]
Min = 6 [rpm] 45 R/W Time speed red. U16 PRM_5122
Max = 240 [rpm.]
Min = 4.0 [s] 11.0 R/W Op. time failure OPEN U16 PRM_5132
Max = 268.0 [s]
Min = 4.0 [s] 11.0 R/W Oper. time rem. max. U16 PRM_5134
Max = 268.0 [s]
69
Actuator controls
AC(V) 01.2/AC(V)ExC 01.2 Profibus DP
Appendix