AUMA AC(V) 01.2, Руководство пользователя

Страница: 76 / 92

Setting value Default Access Parameters Type No.
Min = 132 149 R OPEN max. angle U16 37-9
Max = 247
Min = 80 [%] 100 R OPEN max. torque U16 37-10
Max = 125 [%]
Min = 80 100 R Correction CLOSE U16 37-11
Max = 120
Min = 80 100 R Correction OPEN U16 37-12
Max = 120
Min = 0 5 R Hysteresis torque U16 37-13
Max = 20
Min = 2 2 R Dead band torque U16 37-14
Max = 20
Min = 0 3 R Hysteresis limit I32 37-15
Max = 100
Min = 20 0 R Torque adjust 0 point I32 37-16
Max = 20
Min = 0 [Nm] 20 R Low limit T CLOSE U16 37-17
Max = 65535 [Nm]
Min = 0 [Nm] 100 R High limit T CLOSE U16 37-18
Max = 65535 [Nm]
Min = 0 [Nm] 20 R Low limit T OPEN U16 37-19
Max = 65535 [Nm]
Min = 0 [Nm] 100 R High limit T OPEN U16 37-20
Max = 65535 [Nm]
Min = 100 [%] 150 R/W Speed EMCY OPEN U16 PRM_5057
Max = 200 [%]
Table 71: Potentiometer
Setting value Default Access Parameters Type No.
Data length = 8 bytes
Min = 0 450 R Low limit Uref U16 38-1
Max = 1023
Min = 0 77 R Low limit Upoti U16 38-2
Max = 1023
Min = 0 610 R/W Low limit Uspan U16 38-3
Max = 1023
Min = 0 2 R Hysteresis U16 38-4
Max = 10
Table 72: Phase failure monitoring
Setting value Default Access Parameters Type No.
Data length = 4 bytes
0:
Function not active 1 R Adapt rotary dir. enum 39-1
1: Function active
Min = 20 [0.1 s] 100 R/W Tripping time U16 39-2
Max = 3000 [0.1 s]
76
Actuator controls
Appendix AC(V) 01.2/AC(V)ExC 01.2 Profibus DP