AUMA AC(V) 01.2, Руководство пользователя

Страница: 66 / 92

Table 49: Hardware article no.
Default Access Parameters Type No.
Data length = 140 bytes
_ ARTNR LC _ R ArtNo LC S20 7-1
_ ARTNR LOGIC _ R ArtNo logic S20 7-2
_ ARTNR MCM _ R ArtNo MCM S20 7-3
_ ARTNR_OPT _ R ArtNo PSO S20 7-4
_ ARTNR INTF _ R ArtNo I/O interface S20 7-5
_ ARTNR PBD _ R ArtNo fieldbus S20 7-6
_ ARTNR MWG _ R ArtNo MWG S20 7-7
_ ARTNR FQM _ R Art. no. FQM Ctrl S20 PRM_5083
_ ARTNR MCTRL_ R ArtNo motor ctrl S20 PRM_5094
Table 50: Type of seating
Setting value Default Access Parameters Type No.
Data length = 4 bytes
0: Limit 0 R/W End position CLOSED enum 9-1
1: Torque
0: Limit 0 R/W End position OPEN enum 9-2
1:
Torque
Table 51: Torque switching
Setting value Default Access Parameters Type No.
Data length = 12 bytes
0: Function not active 1 R/W Torque by-pass enum 10-1
1: Function active
Min = 0 [0.1 s] 0 R/W Torque by-pass [s] U16 10-2
Max = 50 [0.1 s]
0: Function not active 1 R/W Torque limitation enum PRM_5161
1: Function active
Min = 100 [%] 0 R/W Torque peak [%] I16 PRM_5162
Max = 150 [%]
Min = 0 [Nm] 20 R/W Trip torque CLO [Nm] U16 10-3
Max = 65535 [Nm]
Min = 0 [Nm] 20 R/W Trip torque OPEN [Nm] U16 10-4
Max = 65535 [Nm]
Min = 20 [%] 80 R/W Wrn torque CLOSE I16 10-5
Max = 100 [%]
Min = 20 [%] 80 R/W Wrn torque OPEN I16 10-6
Max = 100 [%]
Table 52: Local controls
Setting value Default Access Parameters Type No.
Data length = 10 bytes
0: Off (push-to-run op.) 3 R/W Self-retaining Local enum 11-1
1: OPEN
2: CLOSE
3: OPEN and CLOSE
4: OPEN & CL w/o STOP
0: Off 0 R/W Local STOP enum 11-2
1: Sel.sw.Local + Remote
66
Actuator controls
Appendix AC(V) 01.2/AC(V)ExC 01.2 Profibus DP