AUMA AC(V) 01.2, Руководство пользователя

Страница: 68 / 92

Setting value Default Access Parameters Type No.
Min = 2 [0.1 %] 2 R/W Dead band min. (ad.2) U16 PRM_5316
Max = 50 [0.1 %]
Min = 2 [0.1 %] 25 R/W Dead band max. (ad.2) U16 PRM_5317
Max = 50 [0.1 %]
Min = 0 [0.1 %] 0 R/W Tolerance CLOSE I32 14-7
Max = 50 [0.1 %]
Min = 950 [0.1 %] 1000 R/W Tolerance OPEN I32 14-8
Max = 1000 [0.1 %]
Min = 1 [0.1 %] 10 R/W Outer dead band U16 14-10
Max = 100 [0.1 %]
0: Function not active 0 R/W Limit setting range enum 14-11
1: Function active
Min = 0 [0.1 %] 1000 R/W Limit OPEN U16 14-12
Max = 1000 [0.1 %]
Min = 0 [0.1 %] 0 R/W Limit CLOSE U16 14-13
Max = 1000 [0.1 %]
0: Function not active 1 R/W Speed red.prior setp. enum PRM_4076
1: Function active
Min = 2.0 [%] 0 R/W Speed red. range U16 PRM_4070
Max = 20.0 [%]
Min = 6 [rpm] 10 R/W Target speed at setp. U16 PRM_5116
Max = 240 [rpm]
Min = 4.0 [s] 5.6 R/W Target op. time at setp. U16 PRM_5139
Max = 268.0 [s]
Min = 0.0 [mA] 0.0 R/W Low limit target value U16 PRM_4957
Max = 20.0 [mA]
Min = 0.0 [mA] 20.0 R/W High limit target value U16 PRM_4958
Max = 20.0 [mA]
Table 56: Process controller
Setting value Default Access Parameters Type No.
Data length = 26 bytes
0: I/O interface 0 R/W Setpoint source enum 67-1
1: Fieldbus interface
2: Internal setpoint
0: Internal setpoint 1 0 R/W Beh. setpoint failure enum 67-2
1: Internal setpoint 2
2: Failure behaviour
0: Function not active 0 R/W Inverse operation enum 67-3
1: Function active
Min = 0 [0.1 %] 500 R/W Internal setpoint 1 U16 67-4
Max = 1000 [0.1 %]
Min = 0 [0.1 %] 500 R/W Internal setpoint 2 U16 67-5
Max = 1000 [0.1 %]
Min = 1 [0.1] 10 R/W Proport. gain Kp U16 67-6
Max = 100 [0.1]
Min = 1 [s] 1000 R/W Reset time Ti U16 67-7
Max = 1000 [s]
68
Actuator controls
Appendix AC(V) 01.2/AC(V)ExC 01.2 Profibus DP