AUMA AC(V) 01.2 Скачать руководство пользователя страница 57

Страница: 57 / 92

Table 42: Profibus details

Value and description

Indication in display

In this state, the actuator can only be operated by means of the acyclic Profibus DP-V1 services (only
possible if there is no cyclic DP-V0 connection available.

DP-V1 control

At least one acyclic Profibus DP-V1 connection is active.

DP-V1 active

Profibus interface of channel 1 is used.

Channel 1 active

Profibus interface of channel 2 is used.

Channel 2 active

Profibus DP2 (Profibus DP, channel 1)

Primary

No channel is used as primary channel.

None

Channel 1 is used as primary channel.

Channel 1

Channel 2 is used as primary channel.

Channel 2

Profibus DP2 (Profibus DP, channel 2)

Backup

No channel is used as backup channel.

None

Channel 1 is used as backup channel.

Channel 1

Channel 2 is used as backup channel.

Channel 2

The actuator controls are assigned different ident numbers depending on the function.

Profibus Ident no.

For Profibus DP-V0 and DP-V1

0x0C4F

for Profibus DP-V0 and DP-V1 including the DP-V2 functions Redundancy
with time synchronisation, time stamp and alarms.

0x0CBD

Redundancy

No redundancy available.

None

Redundancy activated according to Profibus DP-V2 (SR).

DP-V2 (SR)

Redundancy activated according to Profibus DP-V2 (FR).

DP-V2 (FR)

General Profibus DP redundancy (AUMA redundancy I)

AUMA redundancy I

AUMA redundancy II

DP-V1 function in the parameter telegram (SetPrm)

DP-V1 (SetPrm)

The DP-V1 services were deactivated using the parameters in the para-
meter telegram (SetPrm).

Deactivated

The DP-V1 services were activated using the parameters in the parameter
telegram (SetPrm).

Activated

Signalling alarms in the parameter telegram (SetPrm)

Alarms (SetPrm)

The alarms were deactivated using the parameters in the parameter
telegram (SetPrm).

Deactivated

The alarms were activated using the parameters in the parameter telegram
(SetPrm).

Activated

Redundancy function in the parameter telegram (SetPrm)

Redundancy (SetPrm)

The redundancy function according to Profibus DP-V2 was deactivated
using the parameters in the parameter telegram (SetPrm).

Deactivated

The redundancy function according to Profibus DP-V2 was activated
using the parameters in the parameter telegram (SetPrm).

Activated

Response behaviour (response) for AUMA redundancy II

Behaviour Tx

Profibus DP response telegrams are exclusively sent via the active
channel

Tx active channel

Profibus DP response telegrams are sent via both channels.

Tx both channels

Actuator controls
AC(V) 01.2/AC(V)ExC 01.2 Profibus DP

Corrective action

Содержание AC(V) 01.2





























































































Результаты поиска

Содержание AC(V) 01.2

Отзывы:

Похожие инструкции для AC(V) 01.2

Бренды по названию

Популярные бренды

AUMA AC(V) 01.2, Руководство пользователя

Результаты поиска

Содержание AC(V) 01.2

Отзывы:

Похожие инструкции для AC(V) 01.2

Бренды по названию

Популярные бренды