ATTO Technology FastStream NDMP 4600, Инструкция по установке и эксплуатации

Страница: 39 / 58

32
Interfaces: CLI
SNMPTraps
Enables/disables SNMP trap functions.Consult your
network administrator for further assistance with SNMP.
Default: disabled
set SNMPTraps [enabled | disabled]
get SNMPTraps
TailEventLog
Displays new events to the terminal during a serial or
Telnet session. Press <ESC> to exit tail mode.
TailEventLog
Temperature
Returns the current internal temperature in degrees
Celsius.
get Temperature
TraceLog
When enabled, records various aspects of traffic the
FastStream NDMP 4600 receives to the trace log.
Default: disabled
set TraceLog [enabled|disabled]
get TraceLog
TraceLogFilter
Filters the display of data for specific ports using the
DumpTraceLog command when trace logging is
enabled. If all is set for a particular port, all information
about that port is captured when the command
DisplayTraceLog is issued. If disabled is set for a port,
no trace log entries for the port are captured.
set TraceLogFilter [SCSI | all] [sb | all] [disabled | chkcond
| all]
get TraceLogFilter [SCSI | all] [sb | all]
Voltage
Displays the current level of voltages monitored by the
FastStream NDMP 4600.
VCC: +5.03 V
VDDA: +3.31 V
VDDB: +2.49 V
VDDC: +1.5V
VDDD: +1.35V
ALL: all monitored voltages
get Voltage <VCC | VDDA | VDDB | VDDC | VDDD | ALL>
WrapEventLog
When enabled, the FastStream NDMP 4600 logs up to
2,048 event entries before wrapping (overwriting the first
entries). If disabled, the FastStream NDMP 4600 s tops
logging event entries when the buffer is full.
Default: enabled
set WrapEventLog [enabled|disabled]
Requires a SaveConfiguration command
get WrapEventLog
WrapTraceLog
When enabled, the FastStream NDMP 4600 logs up to
2,048 trace entries before wrapping (overwriting the first
entries). If disabled, the FastStream NDMP 4600 s tops
logging trace entries when the buffer is full.
Default: enabled
set WrapTraceLog [enabled|disabled]
Requires a SaveConfiguration command
get WrapTraceLog