ATTO Technology FastStream NDMP 4600, Инструкция по установке и эксплуатации

Страница: 38 / 58

31
ATTO Technology Inc. FastStream Installation and Operation Manual
Info
Displays version numbers and other production
information for key components within the FastStream
NDMP 4600
Info
IsReserved
Displays the reservation status of the current FastStream
NDMP 4600 session/interface.
If set, the configuration image is being modified by
another FastStream NDMP 4600 services session: set
commands are temporarily unavailable but information
commands are available.
Executing a SaveConfiguration, RestoreConfiguration or
FirmwareRestart RELEASES the FastStream NDMP
4600 so that other services users may access it.
When FastStream NDMP 4600 services interface is
RESERVED, set commands from other users are
unavailable.
At least one interface must always have access to the
FastStream NDMP 4600.
IsReserved
Ping
Ping sends an ICMP echo request to the specified host.
ping [DPn | mp1] [xxx.xxx.xxx.xxx] <count <size>>
RMON
RMON collects and stores Ethernet data on data ports at
specified intervals. You can display the entire table
requested, or a single entry based on the index (and
sample index for the Ethernet History table).
Entries in the Ethernet History table are not valid when
the Sample Index is 0.
Setting the history control entries take effect immediately,
but changes must be saved to be persistent over a reboot.
Valid range for EthernetStat index: 1-3
Valid range for historyControl and EthernetHistory
index: 1-6
Valid range for historyControl buckets requested: 1-
180
Valid range for historyControl interval: 1-3600
Default: Refer to Exhibit 5.1-7 on page 38
set RMON [idx] [bucketsRequest] [interval] [valid | invalid]
Usage for entire table
get RMON [ethernetStat | historyControl] <idx>
Usage for single index entry:
get RMON ethernetHistory <idx sampleIdx>
RouteDisplay
Displays a list of NDMP to SCSI mappings. The optional
LUN parameter limits the list to the map which satisfies
a search for the given LUN .
RouteDisplay NDMP <Target Name> <LUN>
SerialNumber
Reports the FastStream NDMP 4600 serial number which
is unique for each FastStream NDMP 4600. The serial
number tracks the board throughout its life and should
not be changed for any reason. Set form requires operator
privileges.
get SerialNumber
SNMP
Controls whether or not SNMP functions on the
FastStream NDMP 4600.
SNMP [enabled | disabled]
Default: enabled
SNMPDumpMIB
Dumps the contents of the ATTO FastStream NDMP 4600
private SNMP MIB to the current CLI session. Consult
your network administrator for further assistance with
SNMP.
SNMPDumpMIB
SNMPExtendedTraps
Controls Extended SNMP map functioning such as device
transition and device error. Consult your network
administrator for further assistance with SNMP.
set SNMPExtendedTraps [enabled|disabled]
get SNMPExtendedTraps
SNMPTrapAddress
Sets/displays the IP trap addresses and levels. Consult
your network administrator for further assistance with
SNMP.
Index: value between 1 and 6
IP Address: standard IP address
Trap Level: severity required for an event to trigger
trap
None: no traps are sent to the address
. ALL: all triggering events are sent
Warning: warning and critical events are sent
. Critical: only critical events trigger a trap
set SNMPTrapAddress [Index] [IPAddress]
[none | all | warning | critical]
get SNMPTrapAddress