ATTO Technology FastStream NDMP 4600, Инструкция по установке и эксплуатации

Страница: 27 / 58

20
Interfaces
3 At the telnet prompt, issue the open command
where x.x.x.x is the IP address of the
FastStream NDMP 4600.
telnet > open x.x.x.x
4 If you have to specify a port type, enter the port
type “telnet” and the terminal type “vt100”.
port type: telnet
terminal type: vt100
5 Enter the default values for the user name,
“root”, and the password, “Password”, if you did
not set new values in
Set the Real Time Clock
on page 11.
Exhibit 5.0-1 Start up messages.
ATTO FastStream NDMP 4600
(c) 2002 - 2006 ATTO Technology, Incorporated.
Firmware version 001C release date Mar 9 2006, 17:54:13 Build 001C
Base version 9.00
255 Megabytes of RAM Installed.
4 GbE Data Port(s).
2 Ultra320 SCSI Interface Port(s).
World Wide Name = 20 00 00 10 86 30 01 78
Serial Number = "IPB4600100003"
User-defined name = "UnitDflt"
Internal Temperature = 38 C [0 - 70]
For help, type HELP.
Active Configuration = ATTO
Mar 9 2006 17:54:13 001C Initialization Complete
STM41T0 RTC initialized
SCSI Interface 1 PCI Config Test Passed
SCSI Interface 1 Initialization Passed
SCSI Interface 2 PCI Config Test Passed
SCSI Interface 2 Initialization Passed
Initializing Port DP1.............................
Initializing Port DP2...................................
Initializing Port DP3...................................
Initializing Port DP4...................................
Initializing Port MP1............
GBE hardware Init done.
Power-On Self-Test (POST) Completion Status: GOOD
Ready.