ATTO Technology FastStream NDMP 4600, Инструкция по установке и эксплуатации

Страница: 28 / 58

21
ATTO Technology Inc. FastStream Installation and Operation Manual
5.1 CLI provides ASCII-based interface
The command line interface (CLI) provides access to the ATTO FastStream NDMP 4600 through a set
of ASCII commands. CLI commands may be entered while in CLI mode.
Note
The recommended management tool for the
FastStream NDMP 4600 is ATTO
ExpressNAV.
The Command Line Interface provides
configuration and monitoring for the FastStream
NDMP 4600. CLI commands may be entered
while in CLI mode or on the ExpressNAV
interface
Advanced CLI page.
• CLI commands are context sensitive and
generally follow a standard format
[Get | Set] Command [Parameter 1 |
Parameter 2]
followed by the return or enter key
• CLI commands are case insensitive: you may
type all upper or all lower case or a mixture.
Upper and lower case in this manual and the
help screen are for clarification only.
• Commands generally have three types of
operation: get, set and immediate.
• The get form returns the value of a parameter or
setting and is an informational command.
Responses to get commands are specified in the
Results field for each command, followed by
Ready .
• The set form is an action that changes the value
of a parameter or configuration setting. It may
require a
SaveConfiguration command and a
restart of the system before it is implemented.
The restart can be accomplished as part of the
SaveConfiguration command or by using a
separate FirmwareRestar t command. A
number of set commands may be issued before
the
SaveConfiguration command.
Responses to set commands are either an error
message or Ready. * . The asterisk indicates
you must use a SaveConfiguration command
to finalize the set command.
SaveConfiguration asks if you want to restart
the system or not.
• Commands which do not require a
SaveConfiguration command are immediately
executed.
Responses to commands are either an error
message or data results followed by Ready.
For an example of a typical CLI command and
response, see Exhibit 5.1-2 on page 22.
Exhibit 5.1-1 Symbols, typefaces and abbreviations used to indicate functions and elements of the
Command Line Interface used in this manual.
Command conventions
Symbol Indicates
[ ] Required entry
< > Optional entry
| pick one of
- a range (6 – 9 = 6, 7, 8, 9)
mp1 Management port
DP Data port (1<= Dp <= 4)
sb SCSI bus