ATTO Technology FastStream NDMP 4600, Инструкция по установке и эксплуатации

Страница: 19 / 58

12
Installation: Configuration
Enhance performance
Default settings are appropriate for most systems.
However, you may wish to enhance performance
using the ATTO ExpressNAV user interface.
1 If you are not already in the ExpressNAV GUI,
type the IP address of your FastStream NDMP
4600, as found in
Discover the IP address on
page 5, in a standard browser and press Enter .
2 Click through the menu items at the left side of
the screen to view settings and possible
changes. For example, if all switches on the
SAN support jumbo frames, you may change
the MTU by clicking on the
Ethernet page and,
at the MTU title, selecting 9014.
Set up a VLAN: Virtual Local Area Network
A Virtual LAN (VLAN) is a group of devices on
the same physical LAN which can communicate
with each other as if they were all on different
physical LANs. This creates a network that is
independent of physical location, allows grouping
of users into logical workgroups, increases
efficient use of resources, and adds security
options by allowing some users into the LAN and
keeping other users out.
You may create up to eight Virtual LAN IDs for
each Ethernet data port. Each VLAN ID is
assigned a VLAN name of up to 64 characters. If
no VLAN ID exists for a data port, VLAN is
disabled for that port.
1 If you are not already in the ExpressNAV GUI,
type the IP address of your FastStream NDMP
4600, as found in
Discover the IP address on
page 5, in a standard browser and press Enter .
2 From the left-hand menu, click on the Ethernet
Port Configuration page.
3 Click on the data port you wish to configure.
4 Add a VLAN ID number and name in the
appropriate boxes.
5 Press Submit.
After rebooting, Virtual LAN is in effect.
For details on the commands used to set up a
VLAN, refer to
Ethernet commands on page 37.