ATS 2140-M Series, Инструкция по эксплуатации

Страница: 79 / 115

79
7.4.3 Reload a Test
In some instances, it may be necessary to reload a test in order to start it over. Select Tests, then Reload
from the main menu.
7.5 Stopping a Test
At any time a test is running, the operator may stop the test manually. There are a variety of reasons why
this might be desired. For example, if a problem is detected that would render the test results invalid, or
if no further useful data will result, the test can be terminated.
1. From the main menu, select Tests, then Stop.
a. Select the frame to be stopped from the pull-down menu.
b. Click OK.
c. Verify that the system should stop this test and click Yes. The test will be terminated.
2. Click the Frame icon on the main menu.
a. Select the appropriate frame from the Frame Services menu.
b. Click Stop the Test from the options.
c. Verify that the system should stop this test and click Yes. The test will be terminated.
3. Double-click on the appropriate line of the Status Display screen.
a. Select Stop the Test from the Frame Services menu.
b. Verify that the system should stop this test and click Yes. The test will be terminated.
Once the operator has terminated the test, the system will proceed through several states, depending on
the system configuration. The furnace will shut down, and the load will be removed from the specimen
if automatic loading is implemented. The frame will then proceed to the Post Test state, where it will
remain until the operator intervenes.