ATS 2140-M Series, Инструкция по эксплуатации

Страница: 23 / 115

23
Section 5: Assigning User Names, Privileges, and Passwords
5.1 Assigning User Names
Other than certain viewing functions, no operation of the system is possible unless a user possessing
the appropriate assigned privileges has logged in. User names and passwords should be assigned by a
System Administrator prior to testing. It is important to set up and use individual user accounts if more
than one operator uses the tester. This will deny unauthorized access to specific functions of testing,
allowing for greater accountability and accuracy of testing data.
5.1.1 Initial User Account Setup
When the system first arrives, ATS will walk the administrator through the setup process. It is important
to first create a user name and password for the administrator.
1. The log-in information upon initial setup is “username” for both the user name and password.
NOTE: Do not use quotations when typing in this user name and password.
2. Once logged in, the administrator should follow the steps in 5.1.2 to create his/her own user name
and password.
NOTE: Be sure to assign all of the privileges for this initial user name. This will give the administrator all
rights and privileges in the system.
3. Log out of the username account and log in under the new administrator user name and password.
4. Follow the steps in 5.1.3 to delete the “username” account from the system, ensuring that
no unauthorized access is available to operators.
5. Create operator accounts, with the appropriate privilege designations, according to the steps
in 5.1.2.