Athena 1470-HE EVO, Перевод оригинальной инструкции

Страница: 45 / 196

PAGE
45
The photo above shows how the locking system of the extensible structure
must be positioned during maintenance work. By means of the "ground
controls", it is possible to lift the work platform until it is possible to place
the two locking brackets vertically and aligned with the pins below.
Subsequently lower the work platform until the brackets are locked in the
relative pins.
Warning: during this procedure, there must be no load or people on the work
platform.
Warning: during this procedure, if it is not necessary to remove one or both
the lifting cylinders, it is advisable to allow the structure to be supported by
the cylinders themselves. Position the brackets as additional safety.
•
Protect the environment: avoid spilling oil when changing it or topping up.
Used oil must be disposed of in accordance with the laws in force.
•
Never insert the body, limbs or fingers in sharp, jointed opening on the
machine that is not controlled or without proper guards unless securely
blocked.
•
Do not use petrol, solvents or other flammable liquids as detergents.
Always use authorized non-flammable and non-toxic commercial products.
•
Do not use open flames for lighting purposes when performing maintenance.