Athena 1470-HE EVO, Перевод оригинальной инструкции

Страница: 35 / 196

PAGE
35
2.6 Checks on the machine before each use
•
Visually check under and around the machine to make sure that there are no
oil or fuel leaks. If leaks are discovered, follow the MAINTENANCE
instructions.
•
Make sure that there is no hydraulic oil leaking from the hoses and from the
other components (cylinders, distributors, fittings, etc.).
•
Check that there are no cut or worn electrical cables and that the
connectors are correctly secured.
•
Check the fuel level before starting so as to prevent interruptions while
working.
•
Check the engine oil level.
•
Check the hydraulic oil level.
•
Do not run the engine in closed areas like garages or similar. The engine
exhaust gas contains carbon monoxide, a poisonous gas that can quickly
saturate a closed space and cause difficulties or even death.
•
Make sure that none of the screws, bolts or ferrules are loose or missing.
•
Make sure that all the "Seeger" safety rings are present and correctly in place
with their washers.
•
Make sure that all the pins are in place and correctly secured.
•
Check that the steel structure is not deformed.
•
Make sure there are no cracks in the welds, damage or abnormal wear
•
Make sure the tracks are not cut or abnormally worn
•
Always check to make sure that the track tension is correct
•
Check, and if necessary grease, the scissor runners, both those in contact
with the platform and those in contact with the lower frame.
•
Check that the manual, the plates and the stickers are on the machine.
•
Make sure that the 12V internal combustion engine ignition battery is fully
charged; a simple way to check is turning on the internal combustion engine,
which must turn on easily.
•
Make sure that the gate leading to the platform closes and locks itself
automatically once released.