Athena 1470-HE EVO, Перевод оригинальной инструкции

Страница: 129 / 196

PAGE
129
KEY
A. Whenever the machine is
used
D. monthly or every 100 hours G. annually or every 1500 hours
B. Daily or every 10 hours E. every two months or every
250 hours H. after long periods of inactivity (30 days)
C. Weekly or every 50 hours F. quarterly or every 500
hours * Refer to the engine use and maintenance
manual
Attention: All maintenance operations must be performed as indicated in
Chapter 2 Safety information . In particular, maintenance must only be carried
out after the emergency push-button has been pressed, the engine turned off
and using individual protective equipment and the extendible structure locking
system.
Attention: Disconnect the machine from all power sources
Attention: It is mandatory to perform all MEWP movements required for
inspections/maintenance using the ground controls and without operators on the
work platform. When checking machine operation from the work platform, the
required movements must be performed as near to the ground as possible.
Note: Use of spurious spare parts, or parts that have not been approved by the
manufacturer voids the warranty and relieves ALMAC S.r.l. from all liability.
Note: Modifications or variations to the MEWP are forbidden unless authorized
by the manufacturer.
Note: All maintenance work that is not described in this manual must be
authorized by the manufacturer and must be performed by authorised
technicians.
Attention: Do not use the machine if one of its mechanical or hydraulic elements
or a control or safety device is faulty! Immediately notify an Almac Srl customer
assistance centre