Athena 1470-HE EVO, Перевод оригинальной инструкции

Страница: 151 / 196

PAGE
151
Warning: if the conditions indicated above are not met, do not use the machine
and contact a qualified technician trained by Almac Srl
6.2.13 Checking the operation of the scissor angle sensor
With the frequency indicated in the general chart, check the scissor angle
sensor.
•
Lift the platform to a height greater than the transport height, check that
the manual or automatic levelling functions are not allowed.
•
Check the operation of the anti-shearing device. This can be done by
lifting the work platform to a height of about 2 metres above the
transport height. It is necessary to check that the downward movement
stops automatically at a height such that the vertical distance between
the ends of the scissors must be greater than 50mm. Further movements
downwards are possible only after a 3s delay at reduced speed.
•
Check the operation of the travel function with the platform lifted; this
test is performed by lifting the platform to a height that involves an angle
of the scissor frames of 20° with respect to the horizontal (maximum
height of transit area 4.53m) and make sure that it is possible to travel
with the machine only at reduced speed. Also make sure that at greater
heights the light indicator (2) turns off and that it is not allowed to move.
If the operations described above take place in the indicated sequence, it
means that the angle sensor is working properly.
Warning: if the conditions indicated above are not met, do not use the machine
and contact a qualified technician trained by Almac Srl