Athena 1470-HE EVO, Перевод оригинальной инструкции

Страница: 107 / 196

PAGE
107
4.2.5.1 Automatic stabilisation
To perform operations on surfaces which are not planar, but complying with the
maximum slopes allowed, the machine comes with an "automatic stabilisation"
system which is enabled while the "STABILISERS" lever (11) is activated, only
when the platform is configured within the maximum transport height (< 2 m
floor surface).
If the machine, when inclined, exceeds the maximum permitted slopes:
•
Lateral: 20°
•
Longitudinal: 12°
It will not be possible to stabilise it due to the maximum stroke of the cylinders.
The stabilisers will move downwards until they rest on the ground. Once this
operation is complete, the machine will be levelled and automatically lifted
from the ground so that the tracks come off from it.
The end of the automatic stabilisation phase is signalled by a short beep.
4.2.5.2 Voluntary extension of the stabilisers
If the machine is on a flat surface, or on a slightly inclined surface, after the
automatic stabilisation procedure the machine is aligned to the tracks slightly
lifted from the ground.
In the event the machine is to be further lifted so as to reach the maximum
working height, it will be necessary to lower the stabilisers even more.
By selecting and holding the automatic stabilisation selector switch, the
stabilisers are further extended. The end of the levelling phase is signalled by a
short beep.
This procedure can be repeated several times.