Athena 1470-HE EVO, Перевод оригинальной инструкции

Страница: 120 / 196

PAGE
120
91 Starter battery voltage higher than 16V
92 EPROM memory internal error
93 CAN network communication error
40 Frame angle sensor redundancy error
30 Scissor angle sensor redundancy error
70 Pressure transducer redundancy error
41 No signal from the frame angle sensor 1
31 No signal from the scissor angle sensor 1
71 No signal from the pressure transducer 1
42 No signal from the frame angle sensor 2
32 No signal from the scissor angle sensor 2
72 No signal from the pressure transducer 2
73 No signal from the pressure transducer 3
10 No signal from the console
110 Low engine oil pressure (only Kubota engine)
111 Water temperature too high (only Kubota engine)
115 Platform upward movement detected without selecting the
command
116 Detected difference in pressure of the lifting cylinders greater
than 30 bar
141 No signal from the transducer of the bottom side of stabiliser 1
142 No signal from the transducer of the stem side of stabiliser 1
143 No signal from the transducer of the bottom side of stabiliser 2
144 No signal from the transducer of the stem side of stabiliser 2
145 No signal from the transducer of the bottom side of stabiliser 3
146 No signal from the transducer of the stem side of stabiliser 3
147 No signal from the transducer of the bottom side of stabiliser 4
148 No signal from the transducer of the stem side of stabiliser 4
151 Compatibility error between the contacts NC and NO of the
limit switch of the pin inserted in stabiliser 1
152 Compatibility error between the contacts NC and NO of the
limit switch of narrow stabilisation of stabiliser 1
153 Compatibility error between the contacts NC and NO of the
limit switch of the pin inserted in stabiliser 2
154 Compatibility error between the contacts NC and NO of the
limit switch of narrow stabilisation of stabiliser 2