©
Copyright Asyril S.A.
Asycube Control URCap installation and configuration
Version: A2
9/50
Figure 2-3
– HMI: set network setting of an Asycube platform for the first time
To modify the network settings of an Asycube platform, already configured in the HMI
software:
•
Start the HMI software & click on the Asycube platform, you want to modify the
network configuration of (#1).
•
Once the platform selected, click on the
configuration
tab (#2) and set the
ip address
,
the
subnet mask
and the
tcp port
of the platform (#3).
•
Click on the
apply configuration
button to apply the new platform’s network settings
(#4).
Figure 2-4 - HMI: modify network settings of an already-configured Asycube platform