©
Copyright Asyril S.A.
Standard use of the Asycube Control URCap
Version: A2
22/50
Figure 3-14
– Asycube backlight programming node – Left: set backlight off; Right: set
backlight to flash for 0.5 seconds.
The user can also choose to use the flash mode to have the backlight lit for some duration
(between 0 and 10 seconds). Once the button Flash is pressed, a field appear allowing the
user to input the duration with the keyboard.
3.2.3. Offline programming
It is possible to use the URCap nodes without having to connect physically to an Asycube. As
the different behaviors implemented by the URCap are different with respect to the currently
connected unit (Asycube 50, 80, 240 or 530), the
Network
sub-menu, in the
Installation
tab,
allows the user to select the unit type, without having to connect physically to the platform,
through the
Unit
dropdown. The user can then use the URCap nodes as if the selected unit
was connected.
Figure 3-15
– Unit selection to enable offline programming
