TrojanTwo-Compact User Guide v3.8
Page | 69
11.3.5
Print Queue menu
Print jobs are queued progressively as they sent and processed in FIFO (first in first out) system. The
queue can be managed from Print queue menu.
The print queue is stored even if the T2-C press is restarted.
NOTE:
The currently printed job in the queue cannot be deleted.
Pause/Resume Print Queue button.
While print queue is paused, the print jobs are pending in the queue and printing only starts when
the queue is resumed.
The current print queue status (if running or paused) is also displayed always at right side status bar.
The number in () indicates the number of print jobs pending in the print queue.
Information button.
Same as in job library (see section 11.3.4).
Batch Mode on/off.
Batch mode means that all print jobs sent within a defined timeout period will be merged into 1 job
and will be printed out at once when the timeout expires. The timeout counter begins when batch
mode is switched on. When timer expires, a new print job appears in print queue and job library,
which includes all the jobs that were sent during the timeout period.
Bath mode timeout:
Period of time in seconds while jobs are merged together when batch mode is
on.
