TrojanTwo-Compact User Guide v3.8
Page | 10
2
Setting up the T2-C press
2.1
Physical setup
The T2-C press is packed in a wooden crate and shipped strapped on top of a wooden pallet (total weight of
the package including the crate is around 80kg). After opening the wooden crate, the machine must be
lifted out from the crate. The approximate weight of the machine is
132.3 lbs. (60 kg)
, therefore it is
advised to lift the machine out of the box by multiple persons to avoid injury.
The machine should be placed on a properly leveled worktable or cabinet which is able to handle the T2-C
press’ weight and size. Footprint:
Length 23.8" (606mm) x Width 22.8" (580mm) x Height 31.3”
(795mm)
. The machine is standing on 4 height adjustable feet. In case it is not possible to set the
worktable to level, then each foot’s height can be adjusted by turning the foot clockwise (lifting the
machine) or turning the foot counter-clockwise (lowering the machine). Make sure that machine is standing
stable and legs are adjusted so that machine is in horizontal level, check leveling using a spirit leveler.
WARNING:
Improper leveling of the machine might cause print quality issues and shorten the
printhead life.
Remove any zip ties and other remaining packaging materials, like bags covering the ink tank connectors.
Open the lids and make sure that luers for the ink tubes are tightened to avoid ink leakage.
Plastic bags and zip ties on ink connectors, luers must be tightened on ink tubes.
