TrojanTwo-Compact User Guide v3.8
Page | 33
8
Printing modes
The T2-C press supports three printing modes:
Continuous
,
Diecut
or
Blackmark,
depending on the format
of the applied label material.
8.1
Continuous printing mode
Continuous label material format is when the label roll has no pre-cut gaps or pre-printed
registration marks (black marks) between the labels.
To set the T2-C press to continuous printing mode go to TrojanTwo tab ->
Media settings menu
and
select the
‘Continuous’
button at TOF mode field, then press the
‘Save & apply’
button to apply the
setting changes.
NOTE:
TOF = Top of Form, the top of form algorithm describes how to detect the top of the next
label.
The currently active TOF mode is displayed in green.
In continuous mode the label gap/ blackmark sensor is not used.
The
gap between the labels
can be set at
TrojanTwo -> Media settings menu
.
IMPORTANT:
Because of inter-page actions the printed labels have to have:
Minimum 3 mm gap at 6IPS mode (recommended gap is 4mm).
Minimum 3 mm gap at 12IPS mode (recommended gap is 4mm).
Maximum gap size is 65 mm
IMPORTANT:
Setting label gap outside the minimum and maximum range can result in label skipping or
enormously high label gaps.
Save & Apply
