TrojanTwo-Compact User Guide v3.8
Page | 38
Label eye sensor for detecting label gaps and black marks. Sensor can be moved manually along the
2 rods (indicated with yellow arrow on picture above).
IMPORTANT:
Requirements for the format of the blackmarks are the same as for label gaps as blackmarks
practically act as label gaps. So due of inter-page actions the printed labels have to have:
Minimum 3 mm high blackmarks at 6IPS mode
(height measured according to print direction and recommended blackmark height is 4 mm).
Minimum 3 mm high blackmarks at 12IPS mode
(height measured according to print direction and recommended blackmark height is 4 mm).
8.4
Gap size and speeds
The minimum gap size and print speed has a dependency due to the image processing in the print head.
Therefore, we recommend these minimum gap size settings:
Print speed
Minimum gap size
6 inches per second / 9 meters per minute
3 mm (0.118”)
12 inches per second / 18 meters per minute
3 mm (0.118”)
NOTE:
the complexity of the image may also influence this. A very simple bar code image may allow for
shorted gap sizes.
T2-C press will display an error in the ‘Error’-field: ‘Missed TOF or datapath underrun’ if this occurs.