TrojanTwo-Compact User Guide v3.8
Page | 49
11
User Interface (UI)
11.1
Right side status bar
The status bar provides real time information about the T2-C press’s current status. The main points are:
System State:
the machine is only ready to print if the system state is ‘ONLINE’.
Other system statuses can be ‘JobAvailable’ (when print job(s) loaded to the print queue),
‘Maintenance Busy’ (when printer is doing maintenance) or ‘Offline’ (if no printhead is installed or
if there is an error state).
Error state:
displays a certain error message if there is an error state (see chapter 16 for possible
error states) or ‘NA’ (NA = Not Available) if there is no error state.
Print state: ‘
NA’ if T2-C is in idle state, ‘Printing’ if T2-C is printing and ‘Pause’ if current print job is
paused.
Web state:
displays the current status of the web path system. It is ‘Ready’ when tension is
calibrated and web path system is ready to print, ‘Not Calibrated’ when tension is not calibrated,
‘Moving’ when the label web is moving, ‘Printing’ when machine is printing and ‘Paused’ if the
current print job is being paused or mid job maintenance is going on during printing.
Maint state:
‘Yes’ when there is a maintenance going on or ‘No’ when there is no ongoing
maintenance.
Maint error:
‘Yes’ when there is an error with the maintenance or ‘No’ if there is no problem.
TOF mode:
displays current TOF mode set at TrojanTwo tab -> Media Settings menu. Can be
‘Continuous’, ‘Diecut’ or ‘Blackmark’.
