TrojanTwo-Compact User Guide v3.8
Page | 22
4.
Press
‘Reset Sidesteer Position’
button at TrojanTwo tab -> Handling menu to set unwinder core
horizontal position to the default position.
5.
Adjust the left edge of the media roll to be 57,3mm (2.25”) from the wall. This ensures that the
media left edge will be at the same position as the left edge of the printhead nozzles (where
printing zone begins).
NOTE:
Does not have to be exactly 57,3mm as that is hard to measure exactly with an ordinary ruler. Best is
to set it around 57mm from the wall. The label edge sensor will make the position correction later, once it
is set. For label edge sensor settings, see chapter 4.3.
