TrojanTwo-Compact User Guide v3.8
Page | 34
8.2
Die-cut printing mode
Diecut label material format is when the labels are pre-cut into shape prior to printing and there
are label gaps between the labels.
To set the T2-C press to Diecut printing mode go to
TrojanTwo tab ->
Media settings menu
and
select the
‘Diecut’
button at TOF mode field, then press the
‘Save & apply’
button to apply the
setting changes.
NOTE:
TOF = Top of Form, the top of form algorithm describes how to detect the top of the next
label.
In Diecut mode the built in label gap/ blackmark sensor has to be calibrated to each applied label
material.
Calibrating the label gap sensor:
LERC10 label eye sensor
Save & Apply
