TrojanTwo-Compact User Guide v3.8
Page | 97
15.2
Storing the printhead
Storing used or opened print heads:
Use a clean, lint-free microfiber cloth moistened (not dripping) with clean DI water to do a single pass
cleaning of the nozzles using light to no pressure.
Keep ink coupling in upright position to avoid ink dropping down. Secure the original orange protective
print head cover onto the printhead.
Place a clean moistened lint free cloth into a Zip Lock bag along with the orange covered print head.
Ensure printhead is packaged securely to avoid further damage (in box with flat orientation).
CAUTION!
DO NOT touch the printhead cartridge’s ink couplings, nozzle surface or the
electrical contacts when installing the printhead cartridge. Hold the printhead
cartridge ONLY by the handles.
DO NOT unpack the printhead cartridge until the printer is ready for
installation. Once unwrapped, delay in installing the printhead can
compromise print quality due to dehydration.
DO NOT place an unwrapped printhead on any surface before installing.
Protect the print head at all times from dust, fibers, dirt and other
contaminants.
