Artos CR.11, Руководство пользователя

Страница: 90 / 185

90
To optimize a group of parts, you click on the group pull down from the main menu and select the desired group.
The following screen will appear. Click the box called sort for the grouping order.
Arrange the list in the grouping priority you would like to use. Example in the list below the highest priority is to
group the parts by the lead terminal. Then within the list of lead terminals sort the tail terminals, then within these
smaller lists sort by the wire. To move an item click on it so it is highlighted in blue then click the up or down
arrow to move it in the list
When you click OK on the screen above the list will be automatically organized. If you are just opening this group
and want to organize the list with the last grouping order settings you programmed click the Organize button
circled below.
If there is a Part that you want to run out of sequence you can move it on the list. Click on it so it is highlighted in
blue and then press the up or down arrow button to move it.