ARC FLEX 2JB-VRX, Инструкция по эксплуатации

Страница: 62 / 71

Flex 2JB-VRX Instruction Manual
June 2022 v1.0
Page 61 of 70
Master Transmitter-B Takeover Procedure
Move to A position Press PITCH Move to A position Press START
→ → →
(After 2 seconds)
Transmitter-A
Transmitter-A Transmitter-B Transmitter-B
b. Once the transmitter is locked on to both receivers, move the rocker switch to either
A, B, or A+B position for independent or simultaneous operation.
c. At beginning of each shift prior to turning on the transmitter power, always check if the
rocker switch is correctly positioned for the intended receiver or receivers.
d. For safety, there is a 2-second grace period followed after executing the PITCH
command. What this means is that after PITCH button is pressed, executing the
START command on the other transmitter within this 2-second grace period is
ineffective. In order to gain control of the other receiver you must first wait for up to 2
seconds after the other transmitter presses the PITCH button and then for you to
execute the START command thereafter.
6.3 Master/Slave Tandem Operation (Tandem models)
a. To gain control of one or both receivers, first move
the selector switch to either A, B or A+B position
and then press the START button to activate the
receiver MAIN relays inside receiver A, receiver B,
or both receivers (depending on the rocker switch
position). In order to gain control of a receiver, the
PITCH button on the other transmitter must be
pressed prior to your takeover. For example, in
order for Master transmitter to gain control of the
Slave receiver (receiver-B), Slave transmitter must
first release control of its receiver (receiver-B) by
pressing the PITCH button for up to 2.0 seconds.
This action releases Slave transmitter control of its
receiver (receiver-B). Master transmitter is then
able to take control of the Slave receiver (receiver-
B) by first move the rocker switch to B position and then execute the START command. Make
sure the START command is executed 2.0 seconds after Slave transmitter presses the PITCH
button (refer to diagram below).
Receiver
A
Receiver
B
Master
Transmitter
Slave
Transmitter