ARC FLEX 2JB-VRX, Инструкция по эксплуатации

Страница: 32 / 71

Flex 2JB-VRX Instruction Manual
June 2022 v1.0
Page 31 of 70
4.2.1.7 Pitch & Catch Function
This function allows two operators controlling from opposite ends of a crane or
equipment. When set to “Pitch & Catch” make sure the 2
nd transmitter is set to the
next upper channel (channel X+1). For example, if the system is set to channel 01
then the newly added 2
nd
transmitter must be set to channel 02 with identical serial
number. Furthermore, the receiver auto-scanning function must set to 2-channel
scanning (scans channel 01 and 02). Refer to section 4.2.2.2, section 4.2.6.5 and
section 4.2.6.13 ~ 4.2.6.16 output descriptions and programming. Pitch & Catch
function must set to assigned channel scheme (refer to section 4.1.2 part B).
4.2.2 Button Output Settings
4.2.2.1 Interlocking Button Outputs
Interlocking button pair cannot be pressed
simultaneously as it will cancel each other out.
Refer to section 4.2.1 and section 4.2.6.13 ~
4.2.6.15 output descriptions and programming.
Function # Function Descriptions (left button / right button)
# of Relays
Used
00000000
Normal momentary output
(all contacts open when both buttons are pressed simultaneously
or one after another )
2
00011000
Normal momentary output
(1 st button pressed maintain contact when both buttons are
pressed one after another)
2
00001100
OFF / ON
2
00010010
On + Start/Off + Start - For added safety, you must first press and
hold the green START button and then the On or Off button to
activate the output relay.
2
00001110
Magnet Lift On & Off
2
00010000
OFF / ON (EMS)**
2
00010100 Toggled / Toggled 2
00010110
Toggled / Toggled (EMS)**
2
00011110 Toggled / Normal (EMS)** 2
* EMS: Relay opens when STOP button is pressed down.