ARC FLEX 2JB-VRX Скачать руководство пользователя | Manualshive

Страница: 29 / 71

background image

Flex 2JB-VRX Instruction Manual

June 2022 v1.0

Page 28 of 70

4.1.9 Transmitter Access Card (TAC) Programming

Follow the instruction below on how to program the TAC into the transmitter. The infrared IR
programmer unit is required to complete the programming. Please contact ARC representative
for more details.

1) Reset the STOP button (Status LED turned green for up to 2.0 seconds, transmitter

power on).

2) Press and hold both PB5 and PB6 at the same time for up

to 3.0 seconds (Staus LED blinks orange). Let go of both
PB5 and PB6 when LED-A and LED-B turned red.

3) Entered programming mode with Status LED displays 1x

orange blink for firmware version, remote pairing and IR
programming. 2x orange blinks for transmitter channel
programming, 3x orange blinks for PB1~PB7 function
programming, 4x orange blinks for frequency range
indication,

5x orange blinks for TAC programming

.

4) Select TAC programming mode (Status LED 5x orange blinks) by press and hold PB6

for up to 3.0 seconds five times (LED-B turned red). Let go PB6 when Status LED
turns to 5x orange blinks.

5) Enter TAC programming mode by press and hold both PB5 and PB6 at the same time

for up to 3.0 seconds (LED-A and LED-B turned red). Let go of both PB5 and PB6
when Status LED dispays fast orange blinks (entered TAC programming mode).

6) Placed the access card over the RFID marking located on the frontside of the transmitter.
7) Status LED with green blink means the access card is being programmed into the

transmitter.

8) Status LED with orange blink means the access card is already programmed into the

transmitter.

9) Status LED with red blink means unable to store any more access cards. Each

transmitter can only store up to 16 access cards.

10) Use the IR programmer unit to extract all access card information stored inside the

transmitter for further programming. Other than restricting any unauthorized personnel
from using the transmitter, it can also be individually programmed unlocking any specific
function or functions on the transmitter allowing a more experienced or qualified user to
operate, such as the magnet lift, tandem operation, entering restricted areas, etc…

11) Exit TAC programming mode by pressing down the STOP button (transmitter power off).

→

PB5

PB6

«
...
27
28
29
30
31
...
»

Содержание FLEX 2JB-VRX








































































Отзывы:

Нет отзывов

Похожие инструкции для FLEX 2JB-VRX

Бренд: Panasonic Страницы: 45

Бренд: Campbell Страницы: 8

Бренд: Campbell Страницы: 22

Бренд: Hama Страницы: 8

Бренд: IBM Страницы: 276

Бренд: IBM Страницы: 157

Бренд: Parker Страницы: 32

Бренд: Rayrun Страницы: 4

Бренд: SOMFY Страницы: 4

Бренд: IBM Страницы: 214

Бренд: mikroElektronika Страницы: 3

Бренд: Window Master Страницы: 7

Ambience Control 1

Бренд: EuroLite Страницы: 20

Бренд: SKF Страницы: 88

WFHC 06Z 02 HC RF 24

Бренд: Watts Страницы: 18

Бренд: YASKAWA Страницы: 42

Бренд: YASKAWA Страницы: 351

Бренд: Gardena Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды