ARC FLEX 2JB-VRX, Инструкция по эксплуатации

Страница: 24 / 71

Flex 2JB-VRX Instruction Manual
June 2022 v1.0
Page 23 of 70
4.1.4 Transmitter Start Function Settings
When transmitter goes into sleep mode the system is temporarily deactivated (MAIN relays
opened). Initiate the START command or any command to wake up the system (MAIN
relays closed).
Function Dipswitch-2
4.1.5 Transmitter Inactivity Timer Settings
Set how long the transmitter enters the sleep mode when not in use (no command initiated).
When transmitter goes into sleep mode the receiver MAIN relays are deactivated.
Dipswitch
Settings
Time
Dipswitch
Settings
Time
1 xxx 000 xx 1 minute 5 xxx 100 xx 10 minutes
2 xxx 001 xx 20 seconds 6 xxx 101 xx 30 minutes
3 xxx 010 xx 3 minutes 7 xxx 110 xx 60 minutes
4 xxx 011 xx 5 minutes 8 xxx 111 xx
Constant On
(sleep mode
disabled)
4.1.6 Transmitter Output Power Settings
1mW offers the shortest operating range with lowest battery consumption while 10mW offers
the longest operating range with highest battery consumption (manufacture preset at 6mW).
Dipswitch
Settings
Output
Power
Dipswitch
Settings
Output
Power
1 000 xxxxx 1mW 5 100 xxxxx 5mW
2 001 xxxxx 2mW 6 101 xxxxx 6mW
3 010 xxxxx 3mW 7 110 xxxxx 8mW
4 011 xxxxx 4mW 8 111 xxxxx 10mW
Dipswitch
Settings
Function
1 xxxxxxx 0
START Command
Reactivation
2 xxxxxxx 1
Any Command
Reactivation