ARC FLEX 2JB-VRX, Инструкция по эксплуатации

Страница: 63 / 71

Flex 2JB-VRX Instruction Manual
June 2022 v1.0
Page 62 of 70
Master Transmitter Takeover Procedure
Press PITCH Move to B position Press START
→ →
(After 2 seconds)
Slave Transmitter Master Transmitter Master Transmitte
Slave Transmitter Takeover Procedure
Move to B position Press PITCH Press START
→ →
(After 2 seconds)
Master Transmitter Master Transmitter Slave Transmitte
b. Once the transmitter is locked on to both receivers, move the rocker switch to either
A, B, or A+B position for independent or simultaneous operation.
c. At beginning of each shift prior to turning on the transmitter power, always check if the
rocker switch is correctly positioned for the intended receiver or receivers.
d. For safety, there is a 2-second grace period followed after executing the PITCH
command. What this means is that when PITCH button is pressed, executing the
START command on the other transmitter within this 2-second grace period is
ineffective. In order to gain control of the other receiver you must first wait for up to 2
seconds after the other transmitter presses the PITCH button and then for you to
execute the START command thereafter.