CFS100 SERIES OPERATION MANUAL
SECTION 7: REMOTE PROGRAMMING
Entire Contents Copyright
2016 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CFS100 Series Power Source Operation Manual
Page 110 of 146
7.7.8
*ESR?
This query returns the content of the Standard Event register. Returns the decimal value of
the binary-weighted sum of bits. ( 0 ~ 255 )
7.7.9
*ESE <value> / *ESE?
The Standard Event enable register controls which bits will be logically OR-ed together to
generate the Event Summary bit 5 (ESB) within the Status Byte.
The query version of this command returns the Standard Event enable register content as
the decimal value of the binary-weighted sum of bits. ( 0 ~ 255 )
7.7.10
*STB?
This command reads the Status Byte and the decimal value of the binary-weighted sum of
bits. ( 0 - 255 )
7.7.11
*SRE <value> / *SRE?
The Service Request enable register controls which bits from the Status Byte should be used
to generate a service request when the bit value = 1.
The query version of this command returns the content of the Service Request enable
register as a decimal value of binary-weighted sum of bits. ( 0 ~ 255 )
7.7.12
*PSC {1|0} / *PSC?
This command sets the power-on status clear bit. When set to 1, the Standard Event Enable
register and Status Byte Enable registers will be cleared when power is turned ON. A 0
setting indicates the Enable registers will be loaded with Enable register masks from non-
volatile memory at power ON.
The query version of this command returns the power-on status clear setting. Returns 0 or
1.
Содержание CFS108
Страница 145: ......
