Apach BAKERY Line L 120, Инструкция по эксплуатации и техническому обслуживанию

Страница: 84 / 126

84
EN
2. CONTROL FUNCTIONS FOR THE MIXER HEAD MOVEMENTS
“HEAD DOWN” BUTTONS
-
LOWER THE MIXER HEAD and
subsequently abilitate the mixing functions
They close the mixer head, provided the bowl carriage has
been correctly positioned in the mixer.
Once the mixer head is completely closed, the machine is
ready for use and it is possible to start a new kneading
cycle.
For safety reasons these two push-buttons are located on
the sides of the control panel (one on the right side and
one on the left side) so that the operator is forced to use
both hands to lower the mixer head and this function is
only active when the buttons are kept pressed in.
“HEAD UP” BUTTON
-
RAISES THE MIXER HEAD and
-
subsequently releases the bowl carriage
This button is used to manually raise the mixer head when
the Emergency button has been pressed. Once the mixer
head is completely open, the bowl carriage is released and
it is possible to remove it from the mixer for the
subsequent extraction of the dough.
This button is not active when a mixing cycle is being
executed.
EMERGENCY BUTTON
All the mixer head movements can be stopped by
pressing the Emergency button.
To restart the Up/Down head movements, it is necessary
to first remove the emergency condition, by rotating the
same push button clockwise until it is released, and then
to press the required button.
The timers are reset.
Note:
- For safety reasons, the “Head Down” pushbuttons are only active when these buttons are kept pressed in.
2a.
Use of the “head down” pushbuttons
After having correctly positioned the bowl with all the ingredients into the machine, press the “Head Down” pushbuttons located
on the sides of the control panel to close the machine head. If the bowl has not been correctly positioned, then the head will not
come down and it is necessary to reposition the bowl trolley. Keep the Head Down pushbuttons pressed in until the machine head
is completely closed.
It is recommended that the operator carry out the bowl trolley insertion and removal procedures several times to
become familiar with these operations.
Note:
-
it is extremely important that the ground is level to permit the bowl trolley to be correctly positioned and fixed
to the machine.