Anritsu MX183000A, Руководство по эксплуатации, Страница: 92 / 226

Chapter 4 Operation
4-38
Table 4.6.3-1 Jitter Tolerance Table Setting Items (Cont'd)
Item Description
Max Limit [UI]
(Cont’d)
For Bit Rate: 2.4 to 4 Gbit/s, Clock Setting: Full Rate
Frequency [Hz]
Setting range
[UIp-p]
Setting resolution
[UIp-p]
10 to 100 000 0 to 500 0.001
100 100 to 1 000 000 0 to 100 0.001
1 001 000 to 10 000 000 0 to 8 0.001
10 010 000 to 250 000 000 0 to 0.5 0.001
Upper Limit
[UI]
Sets the upper limit. Be sure to enter a value not less than the value
set for Mask.
The setting range is the same as the setting range above.
Lower Limit
[UI]
Sets the lower limit. Be sure to enter a value not exceeding the value
set for Mask.
The setting range is the same as the setting range above.
Add Adds the value entered above to the Jitter Tolerance Table.
Delete Deletes selected jitter modulation frequency data.
All Clear Deletes all jitter modulation frequency data.
Upper Ratio Resets the Upper Limit value as a ratio of the value set for Mask.
Click Set All Limit to update the changes.
Lower Ratio Resets the Lower Limit value as a ratio of the value set for Mask.
Click Set All Limit to update the changes.
Set All Limit Resets all of the Upper Limit [UI] and Lower Limit [UI] values for
the frequencies selected in the Jitter Tolerance Table.