Anritsu MX183000A, Руководство по эксплуатации, Страница: 81 / 226

4.5 USB Link Sequence
4-27
4
O
per
ation
Table 4.5.4-2 Measurement Operation Setting Item
Item Description
Cycle
Sets the measurement operation.
Repeat: Repeats the measurement in the period specified
at Gating Time.
Single: Ends the measurement in one period.
Gating Time [s] Sets the measurement period in one second units.
Measurement progress bar Displays the measurement progress.
Table 4.5.4-3 BER Measurement Result Display Window
Item Description
Switch To Manual BER Test Displays the BER Monitor window (Figure 4.5.4-2).
Total BER Displays the error rate.
Total Error Count Displays the error count.
Total Bits Displays the amount of measurement data.
Current BER Displays the error rate in 100 ms.
Sync Loss Lights in red in the sync loss status.
Detector IP Address
Input the IP address specified at G0373A USB3.1
Receiver Test Adapter.
The initial value of the IP address specified at G0373A is
“192.168.0.10”.
When [Switch To Manual BER Test] is clicked, the BER Monitor dialog
box shown in Figure 4.5.4-2 is displayed. The MU181500B and MP1825B
settings can be changed while checking BER in this dialog box. Refer to
“Table 4.3.4-1 Setting Items for Adjusting” for the main setting items.
Figure 4.5.4-2 BER Monitor Dialog Box