Anritsu MX183000A, Руководство по эксплуатации, Страница: 53 / 226

3.4 USB Link Sequence Connection Procedure
3-15
3
C
on
nec
tin
g E
qu
ip
m
en
t
16. Use a 100 cm coaxial cable (J1625A) to connect the AUX Input
connector of the MU183020A-x30 and the LFPS RX Output
connector of the USB3.1 Receiver Test Adapter.
17. Use an 80 cm coaxial cable (J1551A) to connect the LFPS RX Input
connector of the USB3.1 Receiver Test Adapter and the USB3.1
Receiver Test Adapter (2 connections).
18. Select MU181000A/B for Clock Source for the MU181500B.
3.3 “Input Signal Settings” in the MU181500B Jitter Modulation
Source Operation Manual
19. Select MU181500B in Clock Setting of the Misc2 tab of
MU183020A-x30.
5.6 “Misc2 Function” in the MU183020A 28G/32G PPG MU183021A
28G/32G 4ch PPG Operation Manual
20. On the Misc2 tab of MU183020A-x30, select Full Rate in the Output
Clock Rate box.
5.6 “Misc2 Function” in the MU183020A 28G/32G PPG MU183021A
28G/32G 4ch PPG Operation Manual
21. Select the PPG connected for MP1825B-x02 Data Input.
3.3 “Input Signal Settings” in the MP1825B 4Tap Emphasis Operation
Manual
22. Select Full Rate for MP1825B-x02 Clock Input.
3.3 “Input Signal Settings” in the MP1825B 4Tap Emphasis Operation